Do you know how to make sesame oil? The traditional method is to use stone mill and manually press it out. At present, machines can completely replace human labor. Fully automatic hydraulic oil press is a small oil press with the easiest operation, the highest oil yield, and the least replacement of wearing parts among mechanical oil presses. The hydraulic sesame oil press machine is also the most advanced equipment that replaces the manual operation of small sesame oil. It produces pure sesame oil, and the sesame oil color is copper, clear, and fragrant.
The quality of the sesame oil squeezed out of the hydraulic sesame oil press is comparable to that of the small mill sesame oil, so more and more people choose the hydraulic oil press. So, how to use and operate the hydraulic oil press? Next, Benteng Machinery will introduce you in detail the specific operation steps of the hydraulic oil press.
The hydraulic sesame oil press operation steps.
1.Loosen the screw nut on the handle However, do not pull it off.
2.Rotate the handle’s plate 180 degrees.
3.Take the cover off of the top by magnet, and the top of the oil container return to its lower position, place half of the oil seeds and then place the iron plate in the middle before filling the remaining half with oil seeds.
4.Cover it, then move the platen up to its the position it was in before.
5.Turn on the heating ring’s power to heat the cage.
6.Open the switch on the electric pump, begin to squeeze. About 10mins.
7.After pressing, release the pressure of the cylinder. Unlock the screw nuts and rotate the upper plate by 180 degrees. Remove the cover plate by using magnets.
8.Tighten your screw nuts. then eject the cake.
9.Return the rod and hydro-cylinder to the lowest position.
Correct operation steps can ensure that a hydraulic oil press can be used for a long time, and can make sesame oil better. You are welcome to get in touch with us and tell us your requirement on sesame oil making.
