Oil and cakes are the main two parts of oil mills that can generate income and economic benefits. No matter what raw material is squeezed, it will produce oil and residue. If more slag is produced, not only the oil yield is reduced, but the cake is also less. Therefore, many users are concerned about the difference between oil and residue?
Today, Benteng Machinery takes 100kg of peanuts as an example.
After 100kg of peanuts pass through the oil press equipment, 45-50 kilograms of oil will be produced, and 50-55 kilograms of cake will be produced. It is theoretically correct. But this is not the actual situation. In the process of oil extraction, a part of oil residue will be produced. During normal oil extraction, the feed must be kept even, and not too much or too little or running idling if the material is cut off. At this time, the load of the machine is normal, the operation is stable, and the sound is rhythmic.
The cake delivery is smooth, there is basically no slag in the low pressure section, and a small amount of oil slag in the high pressure section, but the proportion of the slag in the oil is not more than 10%, the temperature in the press chamber can reach 150-200 ℃, and green smoke comes out from the cake outlet It should be exhausted from the smoking pipe through the shield. When the continuous working time is long and the temperature of the machine is too high, cooling measures such as electric fan and blower should be taken.
Users who have used old-fashioned oil presses know that there will be a lot of slag in the oil output part. The sludge also shows that the oil output rate has been reduced. Therefore, buying a good oil press equipment can produce more oil and less residue. It is also a way to increase profits for oil mills.
