The composition structure of the new oil press has several parts, and different structures have different effects. For the new oil press, its core components determine the overall oil yield effect and production efficiency. Therefore, it is very necessary for users who purchase and use new oil press to understand these core components. Benteng Machinery will provide you with detailed answers to the core components of the new oil press.
1. The feed part of the new oil press
The hopper contains a shift lever (auger), a large bevel gear, and a small bevel gear. Customers should pay attention to pretreatment of oil crops and clean up the impurities and stones in the oil crops to avoid damage to the machine.
2. Gearbox part of the new oil press
The gearbox is the part that drives the machine to operate. Whether this part is operating normally or not is directly related to the working efficiency of the machine. Therefore, the gear should be maintained, and the lower gear and butter should be replaced every six months or a year to ensure the lubrication of the machine. The gears in the current gearboxes are all helical gears, which are less noisy and have a much better use effect than the original spur gears. Customers can purchase and use them with confidence. There are a total of 4 gears in the gearbox. According to different models, the number of teeth of each gear is different. Customers can directly provide the model or number of teeth when purchasing accessories.
3. The heating and pressing part of the new oil press
J. The heating ring is used to heat the temperature of the press chamber of the new oil press. The heating ring of the new oil press is made of medium carbon steel, after high-temperature carburization, and the inner hole is shrewdly ground by a grinder. It is matched with the press bar and wrapped in the outer ring of the press screw to form a press chamber.
Squeeze snails. This accessory is one of the core components of the new oil press. The gradual reduction in the volume of the press chamber when the new oil press works is a limiting condition, and the propulsion of the screw is the driving force for the work. The combination of the two determines the new press The main factor of oil press efficiency.
Extrusion head. The main function of the extrusion head is to adjust the cake thickness of the new oil press. The taper of its front end and the taper of the cake outlet are matched with each other. The gap between the adjustment nuts behind the press shaft is adjusted to achieve the thickness of the oil cake. control.
Squeeze strips. The sliver is one of the core components of the new oil press, and it is also one of the vulnerable parts. When squeezing the oil, if the impurities in the oil are not cleaned up, the sliver is easily damaged. The pressing rod is afraid of hard things. In order to better protect the pressing rod, the oil must be cleaned before pressing the oil.
These parts coordinated to complete the entire oil pressing process of the new oil press.
