The round oil press and the strip oil press belong to the same screw oil press, but there is a big difference between the two. There is a big gap between the structure and the effect of oil production. Some manufacturers would recommend a strip-row oil press, and some recommend a round-row oil press. Therefore, users will have a lot of questions during the purchase process, and they don’t know what kind of oil press equipment they should choose. To distinguish which oil press is better, it needs to be analyzed from many aspects.
Use analysis:
Whether it is a row or a round row oil press, it is a multi-functional oil press equipment, common materials such as soybean, peanut, rapeseed, pepper seed, oil sunflower, cottonseed, flax, walnut kernel, almond, coconut, cocoa bean, corn germ Can be squeezed.
Structure comparison:
The row oil press is the most widely used equipment on the market. The feed port is at the back end of the screw squeezing power. The arranging machine has reasonable design and strong wear resistance. The feed port is at the back end, it is not easy to discharge slag, and it is easy to operate. The circular row oil press is an old-fashioned oil press. Its feed inlet is at the front end of the screw drive, and the circular row press chamber is cylindrical.
Comparison of oil yield:
1. Temperature. The heating system of the round row oil press uses a heating tube, and the heating is particularly slow, and the temperature is unstable after the temperature rises, which directly affects the oil output rate by mistake. The arranging machine uses a heating ring, which is evenly heated, fast and stable
2. Oil delivery method. The oil delivery method is to inject oil from the middle oil line. When the gear-shaped oil line encounters pressure, it squeezes out the contents of the raw material. Although the strip row is the same in theory, the grease is squeezed out from the gap. The principle of this method is much larger than that of the round row. Because the gap of the round row is very wide, the amount of slag is very large, which leads to squeezing. The pressure in the chamber decreases. The gap of each oil line of the row oil press is one-fifth of the oil line, so there is no slag or less slag, and the oil output rate of ensuring sufficient pressure from the press chamber will increase a little. Percentage points.
3. Oil quality. In terms of oil quality, because of the wide gap of the round oil line, scumming will occur, and the squeezed oil will be dark in color and bitter in taste. This will not happen with the bars. The operation of the circular row is particularly troublesome, and the technical requirements for the operator are high, the row is different, and the operation is simple. You only need to set the temperature.
The higher the oil output rate, the more profit it can bring. Therefore, the oil output rate of the strip oil press is significantly higher than that of the round oil press. This can bring more profits to users. At the same time, the strip oil press is more convenient and simple to operate, so it is more conducive to open oil presses.
More information about the benteng oil press machine.
