The screw press was difficult to use. Additionally, the bearing’s service life was significantly reduced. Incorrect operation can cause bearing damage. One of the main reasons that bearing damage can occur is improper operation in oil extraction.
1 Slowly squeeze the oil out of the cake before you start to feed it. After the oil has been extracted slowly adjust the spacing between cakes to reduce their thickness. The amount of oil that is being fed can be increased gradually if the body gets hot. It can function normally if the body’s surface is extremely hot. When the squeeze begins, it is important to avoid excessive feed or sudden increases in load.
2After you have adjusted the gap, tighten the lock nut to stop the squeezer loosening and changing the thickness of your cake.
3Prevent stones and metals from entering the press chamber when feeding your pet. This will prevent any injury to your body or personal accidents.
4The oil pressing process will determine the cake’s thickness. This depends on the type of oil and its moisture content. The cake gap should be between 0.3 and 1.0mm when is squeezing peanuts and soybeans . To increase oil yield, do not reduce the cake gap blindly.
Keywords:diy hand crank oil press, cold compressed oil machine, drill press oil, cold compressed mustard oil, old expeller machine
hot press oil extraction machine, raw cold pressed coconut oil, organic expeller pressed sunflower oil, pieralisi olive oil press for sale, nut press machine, coconut expeller, oil press for sale
