As a novice oil press, there are many things you need to learn before you operating an oil press.You must not only carefully read and fully understand the instruction manual of the cold pressed unrefined coconut oil, but also know how to use it. And you also need to know what to pay attention to when operating the oil press to avoid you making mistakes in operation.
Things to pay attention to when operating an oil press.
1. A tour review should be completed throughout the entire process of expeller pressed coconut oil. A serious problem with stacking must be addressed immediately. If the pressure gauge is damaged or out of order, it should be replaced or repaired. If the safety valve is defective, it should also be investigated and fixed promptly.
2. To ensure oil flows smoothly, the temperature in the small cold pressed virgin coconut oil‘s oil pressing workshop must be maintained at the same temperature.
3. Once the pressing has been completed, you can depalletize. To reduce oil loss, you can use a cloth to absorb oil from the cake rings before unloading. The backing plates should be removed one at a time. Any cake crumbs stuck to the plate should also be removed. You should pay close attention to the oily residue on the top and bottom cakes after unloading.
The organic cold pressed virgin coconut oil that is used to create hydraulic pressure in an oil tank or oil cylinder is usually vegetable oil. However, tung oil can’t be used. This vegetable oil may need to be replaced depending on what oil is being used. It is not necessary to change the oil if it has no effect on the oil’s quality.
These precautions for operate an oil press are really important, and everyone who runs an oil mill should pay attention to it. Because it’s about whether your future oil mill will run smoothly.
