Installing an oil press is the most important lesson for anyone who wants to start an oil shop. This is also as oil press manufacturers we have to teach you a lesson. So today to tell the oil press installation guide is very important. It is suitable for all types and uses of automatic press machine oil oil press equipment. And it’s a very complete and comprehensive guide.
The oil press installer must know the working principle and structure of the oil press. The oil press is composed of five parts, including the heating part of the automatic control part and the regulating transmission part of the pressing part, and the vacuum oil filter. Oil press working principle: when decelerating, the power is transferred to the spindle. Then, the compression screw mounted on the top of the shaft rotates in a circular motion and continuously pushes the thread upward. The spacing between the compression chamber and the screw increases.
The setting in the oil press installation is also very important. Once the automatic screw oil press machine is in place, make sure there is enough space around it for the crew to work.
First, you need to adjust the anchor bolts under the base of the machine to position the machine horizontally. Next, adjust the oil filter barrel to a horizontal position. Finally, once the machine is installed, it can be operated at a distance of 3-5mm from the machine and identified by a ground wire of 0.5m-1m.
In a word, it is very important to learn how to install oil press. The above is about some oil press installation instructions and matters needing attention. I hope it can help you, if you have any questions, welcome to contact me.