The 6YL-95 oil expeller is a highly efficient machine designed to extract oil from various oil-bearing seeds. The bars (also known as pressing bars) are crucial components of this machine. Proper installation and removal of these bars are essential to ensure the machine’s optimal performance and longevity. This guide will provide you with detailed instructions on how to install and remove the pressing bars of a 6YL-95 oil expeller.
Removing the Pressing Bars
1. Turn Off the Machine and Disconnect the Power
Ensure the machine is completely turned off and disconnected from the power source to prevent any accidental startups during the removal process.
2. Remove the Retaining Ring
Carefully use a wrench and screwdriver to remove the retaining ring, exposing the bars inside the machine.
3. Use an Iron Rod to Remove the Pressing Bars
Place one end of the iron rod against the side of a bar. Using your hand, gently strike the other end of the iron rod to push the bar out. Once one bar is removed, the remaining bars will automatically loosen and can be easily taken out.
Installing the Pressing Bars
1. Prepare the Bar Ring
Stand the bar ring upright with the oil groove side facing down. Ensure all bars are lined up correctly, with the deeper oil groove end facing downward.
2. Install the Pressing Bars
Align the Bars: Arrange the bars neatly against the inner wall of the ring. Ensure the side with the deeper oil groove is facing down and that no two bars have their deeper oil grooves facing each other.
Insert the Final Bar: Use a metal rod to gently tap the final bar into place, ensuring it fits snugly with the others.
3. Adjust the Bars for Tightness
Add Metal Shims: If the bars are loose, place metal shims between them to ensure they fit tightly against the inner wall. Adjust until the inner wall feels smooth to the touch without any protrusions.
4. Apply Lubricating Oil
Apply a thin layer of lubricating oil to the newly installed bars to ensure smooth operation and reduce friction during the pressing process.
5. Reassemble the Outer Cover
Reattach the outer cover of the machine, ensuring all screws and nuts are securely tightened. This step is crucial to maintain the integrity of the machine during operation.
6. Test Run the 6YL-95 Oil Expeller
Reconnect the power and start the machine. Observe its operation to ensure the new bars are installed correctly and there are no abnormal sounds or issues. If any problems arise, stop the machine immediately and address them.
Maintenance Tips
1. Safety First: Always wear appropriate safety gear, such as safety goggles and gloves, during the installation and removal process to prevent injuries.
2. Regular Inspections: Regularly inspect and maintain the bars and other components to prolong the machine’s lifespan.
3. Professional Assistance: If you are unfamiliar with the machine’s structure, seek assistance from a professional technician to avoid damage or injury.
Conclusion
Correctly installing and removing the bars of a 6YL-95 oil expeller is essential for the machine’s efficient and safe operation. By following this detailed guide, you can ensure a smooth and secure process. Regular maintenance and timely replacements are key to keeping your oil expeller running efficiently. If you encounter any difficulties, refer to the user manual or contact the manufacturer for technical support.
