The 6YL-95 oil press is an efficient oil pressing equipment. Regular maintenance and care are the key to ensure its long-term normal operation. The cage is an important part of the oil press. Correct removal and installation of the cage is essential for the maintenance of the equipment. This article will introduce in detail how to disassemble the cage of the 6YL-95 oil press.
Disassembly steps
1. Rotate the press shaft and pull it out
First, make sure the machine is turned off and disconnected from the power supply to avoid any danger caused by accidental startup. Then rotate and pull out the press shaft to gradually withdraw it from the press chamber.
2. Loosen the clamping nut
Insert one end of the special lever into the hole of the clamping nut at the cake outlet end. Turn the special lever hard to loosen the clamping nut at the cake outlet end.
3. Loosen the connecting screws
After loosening the clamping nut, you need to use a wrench to loosen the 4 connecting screws at both ends of the upper cage, making sure they are completely loose but do not need to be completely removed.
4. Remove the connecting bolts
Find the 12 bolts connecting the upper and lower press cages, remove the 12 bolts one by one with a wrench, and place them in a safe place for subsequent reinstallation.
5. Remove the upper press cage
Carefully remove the upper press cage from the equipment when all the connections have been loosened and removed. After removing the upper press cage, check it for wear or damage, and perform necessary cleaning and maintenance.
Precautions
1. Safety first: Wear appropriate protective equipment such as goggles and gloves throughout the process to prevent accidental injuries.
2. Operation specification: Strictly follow the above steps to avoid machine damage or personal injury.
3. Regular maintenance: Regular inspection and maintenance of the press cage and other parts are important measures to extend the service life of the machine.
Correctly disassembling the press cage of the 6YL-95 oil press is a key step to ensure the normal operation and efficient work of the equipment. By following the above detailed steps and paying attention to relevant safety and maintenance matters, you can effectively extend the service life of the equipment and improve work efficiency. If you encounter any difficulties or uncertainties during operation, it is recommended to refer to the user manual or contact the manufacturer’s technical support for professional assistance.
